Exchanger Specs |
Dryer Specs |
Louisiana Chemical Equipment CompanyReal Experience, Real Solutions |
Translate |
Toll Free (1)866-289-5232 International (1)281-471-4900 |
114074 DRYERS
ADDITIONAL DESCRIPTION
Unused Scott Industrial Model 6011 Horizontal Indirect Vacuum Paddle Dryer Built in 2016, 60" x 132", 165 cu. ft. of mixing capacity
CONSTRUCTION: End plates are 3/8 plate, with a 3/8 cylinder. All welded construction with 316 stainless steel provided on all product contact points. Exterior of mixer finished with Steel-It. Interior of mixer finished with standard mill finish.
PADDLE AGITATOR: Tubular 10" schedule 80 main shaft cladded in 316 stainless with outside paddles welded to a 2" support post. Solid (1) piece 316 stainless steel support posts are welded to the main shaft, not bored through.
HOT OIL JACKET: A high pressure ASME hot oil jacket constructed of 304 stainless steel complete 14 gauge 304 stainless steel skin continuously welded to the framework with 6 zones.
PRODUCT INLET: Mixer is supplied with (1) flanged product inlet.
BIN VENT FILTER: (1) bin vent filter with approx. 500 CFM, with 127 sq. ft. of filter media for an estimated 4.1 air to media ratio. 316 Stainless steel construction in all product contact points.
ACCESS DOORS: (3) Access doors that are a hinged design for clean out and maintenance. Each door will have a milled slot for a removable rubber gasket.
HOT OIL SYSTEM: Hot Oil Circulating Heat Transfer System rated for 120 kW
| ||||||||||||||||||||||||||||||||